Description Overview This client bridge can connect up to 15 Ethernet client devices running a legacy networking protocol to the WLAN – extending wireless network access to a wide range of protocols. An integrated serial to TCP/IP converter enables a RS-232 asynchronous terminal device to communicate with a compatible station on the network – providing the benefits of wireless mobility for devices like electronic cash registers, scales, servers, printers, medical equipment and other devices. Hardware-accelerated encryption provides higher performance when using WPA2/AES security. I/O PORTS AND SLOTS 1 RJ-45 autosensing 10/100/1000 port; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) 1 RS-232C serial console port CHARACTERISTICS Radios (built-in): 802.11 a/b/g/n/ac Radio operation modes: Client bridge Wi-Fi Alliance Certification: a/b/g/n/ac Wi-Fi Certified Antenna connector: Three RP-SMA Antenna: 2dBi dual-band omnidirectional Number of external antennas: 3 Three spatial streams for up to 1.3 Gbps PHY rate Three RP-SMA connectors for a range of antenna options (NOTE: when using outdoor antennas, customer must supply RP-SMA to Type N adapter) PHYSICAL CHARACTERISTICS Dimensions: 5.5 (W) x 1.3 (D) x 5.0 (H) in (13.97 x 3.3 x 12.7 cm) Weight: 2.01 lb (0.91 kg) ENVIRONMENTAL Operating temperature: 32°F to 122°F (0°C to 50°C) Operating relative humidity: 5% to 95%, noncondensing Nonoperating/Storage temperature: -40°F to 158°F (-40°C to 70°C) Nonoperating/Storage relative humidity: 5% to 95%, noncondensing Shock and vibration: EN 61373 Altitude: 10,000 feet (3,048 meters)
